Beaucoup de travailleurs espèrent obtenir quelques Certificat IT pour avoir une plus grande space de s'améliorer. Certains certificats peut vous aider à réaliser ce rêve. Le test IBM 000-839 est un certificat comme ça. Mais il est difficile à réussir. Il y a plusieurs façons pour se préparer, vous pouvez dépenser plein de temps et d'effort, ou vous pouvez choisir une bonne formation en Internet. Pass4Test est un bon fournisseur de l'outil formation de vous aider à atteindre votre but. Selons vos connaissances à propos de Pass4Test, vous allez faire un bon choix de votre formation.
Pour réussir le test IBM 000-839 demande beaucoup de connaissances professionnelles IT. Il n'y a que les gens qui possèdent bien les connaissances complètes à participer le test IBM 000-839. Maintenant, on a les autres façons pour se former. Bien que vous n'ayez pas une connaissance complète maintenant, vous pouvez quand même réussir le test IBM 000-839 avec l'aide de Pass4Test. En comparaison des autres façons, cette là dépense moins de temps et de l'effort. Tous les chemins mènent à Rome.
Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.
La Q&A de Pass4Test vise au test Certificat IBM 000-839. L'outil de formation IBM 000-839 offert par Pass4Test comprend les exercices de pratique et le test simulation. Vous pouvez trouver les autres sites de provider la Q&A, en fait vous allez découvrir que c'est l'outil de formation de Pass4Test qui offre les documentaions plus compètes et avec une meilleure qualité.
Ajoutez le produit de Pass4Test au panier, vous pouvez participer le test avec une 100% confiance. Bénéficiez du succès de test IBM 000-839 par une seule fois, vous n'aurez pas aucune raison à refuser.
Code d'Examen: 000-839
Nom d'Examen: IBM (Rational Unified Process v7.0)
Questions et réponses: 117 Q&As
Le test Certificat IBM 000-839 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification IBM 000-839. Vous allez prendre toutes essences du test IBM 000-839 dans une courte terme.
Vous serez impressionné par le service après vendre de Pass4Test, le service en ligne 24h et la mise à jour après vendre sont gratuit pour vous pendant un an, et aussi vous allez recevoir les informations plus nouvelles à propos de test Certification IT. Vous aurez un résultat imaginaire en coûtant un peu d'argent. D'ailleurs, vous pouvez économier beaucoup de temps et d'efforts avec l'aide de Pass4Test. C'est vraiment un bon marché de choisir le Pass4Test comme le guide de formation.
000-839 Démo gratuit à télécharger: http://www.pass4test.fr/000-839.html
NO.1 How does an iterative approach help with resource and cost control?
A.It allows the Project Manager to control allocation of resources by phase. Artifacts evolve as required by
each phase and there is increased precision of cost estimates from phase to phase.
B.It allows the Project Manager to make budgetary requests with each iteration. These requests are
based on the expansion of project scope as requested by the customer.
C.It allows iterations to be planned in advance and in detail for all phases. It helps establish costs and a
profile of resource usage can be generated in advance for the entire project.
D.It allows iterations to be de-scoped as required, at the direction of the Project Manager. It allows better
management of costs as features can be moved to later iterations when resources are available.
Correct:A
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.2 In the Construction phase, what are the two areas of focus of the Iteration Plan? (Choose two.)
A.development efficiency
B.project scoping
C.architectural risks
D.product quality
Correct:A D
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.3 What relationship(s) can a work product have to a task?
A.input only
B.output only
C.input and output
D.optional input, mandatory input, and output
Correct:D
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.4 What is the purpose of the Project Plan?
A.to assess the feasibility of the project
B.to establish project staffing
C.to describe the phases and major milestones of the project
D.to provide a sound rationale for project funding
Correct:C
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.5 The Iteration Plan belongs to _____.
A.the Project Management domain and the Specification work product kind
B.the Assessment domain and the Project Management work product kind
C.the Planning domain and the Project Management work product kind
D.the Project Management domain and the Plan work product kind
Correct:D
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.6 Why does the risk-time profile decline more rapidly for iterative development than waterfall
development? (Choose two.)
A.Iterative development exposes design flaws and enables resolution earlier in the lifecycle.
B.With iterative development, customer satisfaction is maintained by early, incremental deliveries of
capability.
C.In iterative development, the software architecture can be revised in any iteration to support new
features and overcome performance problems.
D.Iterative development allows key, non-functional requirements (i.e. performance, fault tolerance and
maintainability) to be addressed early in development.
Correct:A D
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.7 In RUP, what does the Software Development Plan contain?
A.Iteration Plan
B.Requirements Management Plan, Master Validation Plan, Quality Test Plan, and Risk Management
Plan
C.Problem Resolution Plan, Product Acceptance Plan, Measurement Plan, Risk Management Plan, and
Quality Assurance Plan
D.Requirements Management Plan, Product Metrics Plan, and Software Test Assurance Plan
Correct:C
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.8 What are three characteristics of a task? (Choose three.)
A.is work a role performs
B.occurs once in an iteration
C.has granularity of a few hours to a few days
D.usually affects only one or a small number of work products
Correct:A C D
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.9 What are three types of work products? (Choose three.)
A.artifact
B.deliverable
C.milestone
D.outcome
Correct:A B D
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.10 Which is a fine-grained plan?
A.Software Development Plan
B.Business Case
C.Iteration Plan
D.Risk Management Plan
Correct:C
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.11 Which two concepts guide iterative development? (Choose two.)
A.early completion of simple features, to show progress to the customer
B.informal plans, allowing features to be moved to future iterations
C.early baselining of architecture, allowing stability in planning, content and organization
D.scope validation by stakeholders, to account for their needs
Correct:C D
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.12 Which two model elements can be linked to descriptors? (Choose two.)
A.Phase
B.Task
C.Activity
D.Role
Correct:B D
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.13 In planning for iterative development, the Project Plan is referred to as a _____.
A.roadmap
B.fine-grained plan
C.detailed plan
D.risk management tool
Correct:A
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.14 Which two statements are true about an Executable Architecture? (Choose two.)
A.It is a disposable prototype of the application.
B.It is a simulation of the executing system.
C.It is a validation (testable) of the architecture.
D.It is the baseline for the rest of development.
Correct:C D
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.15 Which two factors determine the duration of an iteration? (Choose two.)
A.the size of the project
B.the priority set by the customer on particular features
C.the requirement for a minimum of six iterations in a project
D.the level of automation used to manage code, distribute information and perform testing
Correct:A D
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.16 What is a typical breakdown of total project effort across the phases?
A.Inception 20% Elaboration 50% Construction 20% Transition 10%
B.Inception 5%, Elaboration 20%, Construction 45%, Transition 30%
C.Inception 10% Elaboration 10% Construction 70% Transition 10%
D.Inception 5% Elaboration 20% Construction 65% Transition 10%
Correct:D
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.17 Which three work products belong in the Project Management discipline? (Choose three.)
A.Risk Management Plan
B.Business Case
C.Test Evaluation Summary Report
D.Project Plan
Correct:A B D
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.18 Which is part of the evaluation criteria for successful completion of the Elaboration phase?
A.A final set of requirements is agreed upon.
B.All detailed design documents are reviewed.
C.The architecture is stable.
D.Less than 50% of project budget is expended.
Correct:C
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.19 Which two statements are true about iterations? (Choose two.)
A.Working software is always delivered to the customer.
B.An iterations always has a plan and evaluation criteria.
C.An iteration is a mini project with a plan, deliverables and assessment.
D.There are always multiple iterations in each phase.
Correct:B C
IBM 000-839 examen 000-839 000-839 000-839 examen
NO.20 What are two functions of a Status Assessment? (Choose two.)
A.manages expectations
B.provides a mechanism for resolving management issues
C.rates the overall project quality
D.resolves risk items
Correct:A B
IBM 000-839 examen 000-839 000-839 000-839 examen
Si vous voulez se prouver une compétition et s'enraciner le statut dans l'industrie IT à travers de test Certification IBM 000-839, c'est obligatoire que vous devez avior les connaissances professionnelles. Mais il demande pas mal de travaux à passer le test Certification IBM 000-839. Peut-être d'obtenir le Certificat IBM 000-839 peut promouvoir le tremplin vers l'Industrie IT, mais vous n'avez pas besoin de travailler autant dur à préparer le test. Vous avez un autre choix à faire toutes les choses plus facile : prendre le produit de Pass4Test comme vos matériaux avec qui vous vous pratiquez avant le test réel. La Q&A de Pass4Test est recherchée particulièrement pour le test IT.
没有评论:
发表评论