Le produit de Pass4Test est réputée par une bonne qualité et fiabilité. Vous pouvez télécharger le démo grantuit pour prendre un essai, nons avons la confiance que vous seriez satisfait. Vous n'aurez plus de raison à s'hésiter en face d'un aussi bon produit. Ajoutez notre Q&A au panier, vous aurez une meilleure préparation avant le test.
Pass4Test est un fournisseur professionnel des documentations à propos du test Certification IT, avec lequel vous pouvez améliorer le future de votre carrière. Vous trouverez que nos Q&As seraient persuadantes d'après d'avoir essayer nos démos gratuits. Le démo de Juniper JN0-140 (même que les autres démos) est gratuit à télécharger. Vous n'aurez pas aucune hésitation après travailler avec notre démo.
Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test Juniper JN0-140 sans aucune doute si vous choisissez le Pass4Test.
En quelques années, le test de certification de Juniper JN0-140 faisait un grand impact sur la vie quotidienne pour pas mal de gens. Voilà le problème, comme on peut réussir facilement le test de Juniper JN0-140? Notre Pass4Test peut vous aider à tout moment à résourdre ce problème rapidement. Pass4Test peut vous offrir une bonne formation particulière à propos du test de certification JN0-140. Notre outil de test formation est apporté par les IT experts. Chez Pass4Test, vous pouvez toujours trouver une formations à propos du test Certification JN0-140, plus nouvelle et plus proche d'un test réel. Tu choisis le Pass4Test aujourd'hui, tu choisis le succès de test Certification demain.
L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification Juniper JN0-140. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification Juniper JN0-140.
Code d'Examen: JN0-140
Nom d'Examen: Juniper (Certified Internet Associate (JNCIA-AC) 140 Exam)
Questions et réponses: 120 Q&As
JN0-140 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-140.html
NO.1 What will serve as a RADIUS Client to the Infranet Controller for 802.1x authentication?
A. an ACE server
B. a wireless network
C. an Ethernet switch
D. Odyssey Access Client
Answer: C
certification Juniper certification JN0-140 certification JN0-140
NO.2 Which two actions are required to configure an Infranet Enforcer to communicate with an Infranet
Controller? (Choose two.)
A. Enable SSH.
B. Configure DNS.
C. Enable route mode.
D. Set certificate validation options.
Answer: AD
certification Juniper JN0-140 examen JN0-140 JN0-140 examen JN0-140 examen
NO.3 Which configuration option can be set either in the initial console menu or the Admin UI of the Infranet
Controller?
A. VLAN ID
B. Hostname
C. Domain name
D. Administrative timeout
Answer: C
Juniper JN0-140 examen JN0-140 examen certification JN0-140 JN0-140
NO.4 What happens when Host Checker is configured to perform checks every "0" minutes?
A. Host Checker is disabled.
B. Host Checker will perform continous checks.
C. Host Checker will perform checks when user logs out.
D. Host Checker will perform checks when user first logs in.
Answer: D
Juniper JN0-140 examen certification JN0-140
NO.5 If Host Checker restrictions are applied at the role level and the "Allow access to the role if any ONE of
the select policies is passed" option is unchecked, which two statements are true? (Choose two.)
A. All roles are evaluated together.
B. Each role is evaluated separately.
C. Clients must pass all policies to access the role.
D. Clients will pass as long as one policy is accepted.
Answer: BC
certification Juniper JN0-140 examen JN0-140 JN0-140
NO.6 What is the primary purpose of creating a Location Group Policy?
A. to associate more than one realm with an authentication server
B. to logically group network access devices and associate them with specific sign-in policies C. to allow
or prevent users from accessing resources in specific locations on the network
D. to define the URL that users of network access devices can use to access the Infranet Controller
Answer: B
Juniper JN0-140 examen JN0-140
NO.7 A customer has installed UAC in their network. They have both Windows and Linux endpoints and
must choose a deployment method that everyone can use. Which deployment method allows for multiple
platforms?
A. IPsec enforcement
B. 802.1X enforcement
C. Source IP enforcement
D. Odyssey Access Client
Answer: C
certification Juniper certification JN0-140 certification JN0-140 JN0-140 JN0-140
NO.8 Which two methods of authentication are used by the Infranet Controller for IPSec enforcement?
(Choose two.)
A. dial-up VPN
B. IKE authentication
C. XAuth authentication
D. shared IKE authentication
Answer: AC
Juniper JN0-140 JN0-140 examen
NO.9 When the Infranet Enforcer is set up in transparent mode, which additional resource policy must be
configured to use OAC for IPsec enforcement?
A. IPsec Routing
B. Access Control
C. IP Address Pool
D. Source Interface
Answer: D
Juniper certification JN0-140 JN0-140 certification JN0-140
NO.10 On a pre-existing OAC, which three options can the Infranet Controller overwrite when the user
accesses the Infranet Controller? (Choose three.)
A. SSID
B. login name
C. MAC address
D. wired adapters
E. encryption method
Answer: ADE
certification Juniper JN0-140 examen certification JN0-140
NO.11 Which additional configuration must be completed when setting up role restrictions using certificates?
A. Set up a certificate authentication server.
B. Configure the authentication realm to remember certificate information.
C. Configure the authentication realm to use a certificate server for authentication.
D. Configure a role mapping rule requiring certification information to map user to role.
Answer: B
Juniper JN0-140 certification JN0-140 JN0-140 examen JN0-140 examen
NO.12 Which statement is correct about defining an Infranet Enforcer for use as a RADIUS Client?
A. You do not need to configure a RADIUS client policy.
B. You must know the exact model number of the Infranet Enforcer.
C. You must specify the NACN password of the device in the RADIUS client policy.
D. You do not need to designate a location group to which the Infranet Enforcer will belong.
Answer: A
certification Juniper JN0-140 JN0-140 JN0-140
NO.13 Which interface does the Infranet Controller use to push the configuration?
A. trusted port
B. internal port
C. trust interface
D. untrust interface
Answer: B
certification Juniper JN0-140 examen JN0-140 certification JN0-140 certification JN0-140
NO.14 Which two statements are true about applying Host Checker at the realm level? (Choose two.)
A. If Evaluate is checked then the client must pass policy to get the sign-in page.
B. If Evaluate is checked then the client can fail policy and still get the sign-in page.
C. If Require and Enforce is checked then the client must pass policy to get the sign-in page.
D. If Require and Enforce is checked then the client can fail policy and still get the sign-in page.
Answer: BC
Juniper examen JN0-140 certification JN0-140 JN0-140 examen
NO.15 What is true about the operation of the Infranet Enforcer?
A. It assigns users a set of roles.
B. It allows access based on auth table entries.
C. It verifies whether an endpoint meets security requirements.
D. It configures the UAC agent to allow or deny access to resources.
Answer: B
certification Juniper JN0-140 certification JN0-140
NO.16 Which log contains information about service restarts, system errors, warnings, and requests to check
server connectivity?
A. Events log
B. System log
C. User Access log
D. Admin Access log
Answer: A
Juniper JN0-140 JN0-140 certification JN0-140
NO.17 Which three statements about dynamic filtering are true? (Choose three.)
A. Dynamic filtering creates a query statement.
B. Dynamic filtering has an option to save query.
C. Dynamic filtering can select any log field to filter.
D. Dynamic filtering permanently removes other log entries.
E. Dynamic filtering redraws the log when you select a variable link.
Answer: ABE
Juniper JN0-140 certification JN0-140 JN0-140 examen JN0-140
NO.18 What must be updated regularly to detect the newest versions of personal firewalls on endpoints?
A. Infranet Enforcer firmware
B. Infranet Controller rollback software
C. Host Security Assessment Plug-in (HSAP)
D. Endpoint Security Assessment Plug-in (ESAP)
Answer: D
Juniper JN0-140 examen certification JN0-140
NO.19 Your company has a mix of employees and contractors. Contractor usernames always begin with
"con-"; employee usernames never begin with "con-". You need to give employees access to all
resources and give contractors access to a limited set of resources. Employee and contractor roles have
been created with the appropriate access privileges, and the realm is set to merge settings for all
assigned roles. Which role mapping ruleset would result in the correct access privileges being assigned?
A. username="*" -> Employee-role Stop username="con-*" -> Contractor-role
B. username="*" -> Employee-role username="con-*" -> Contractor-role Stop
C. username="con-*" -> Contractor-role Stop username="*" -> Employee-role
D. username="con-*" -> Contractor-role username="*" -> Employee-role Stop
Answer: C
Juniper certification JN0-140 JN0-140 certification JN0-140
NO.20 Which action is optional when adding an authentication realm for use on an Infranet Controller?
A. Modify sign-in policy.
B. Configure role mapping.
C. Assign authentication server.
D. Configure authentication policy.
Answer: D
certification Juniper JN0-140 examen certification JN0-140
Le test Juniper JN0-140 est le premier pas pour promouvoir dans l'Industrie IT, mais aussi la seule rue ramenée au pic de succès. Le test Juniper JN0-140 joue un rôle très important dans cette industrie. Et aussi, Pass4Test est un chaînon inevitable pour réussir le test sans aucune doute.
没有评论:
发表评论